Epoxy adhesive

Epoxy adhesives are used in various industries due to their high corrosion resistance and adhesion properties, as well as very low shrinkage during curing. Epoxy adhesive is a two-component adhesive, one component of which contains epoxy resin and additives containing toughness-improving materials, diluents and thickeners, and the other component is a suitable curing agent based on the intended application of the adhesive with thickening additives. Is. This adhesive is used in different industries and for different applications. Applications of these adhesives include the following:

Oil and gas, petrochemical and refinery industry (connection of metal and composite pipes, leakage of pipes and tanks, connection of various parts and repair of various pipes and metal and composite tanks)
Construction industry (installation of various stones, tiles and facades, rebar planting, connection of concrete parts and repair of concrete walls)
Aerospace industry (connection of aircraft equipment parts and connection of heterogeneous parts)

The advantages of this type of adhesive compared to other types of adhesives include the following:

  1. Higher strength compared to other adhesives
  2. Suitable adhesion in joining homogeneous and heterogeneous parts such as metal to metal, fiberglass to fiberglass, wood to wood, ceramic to ceramic, stone to stone, metal to fiberglass, metal to ceramic, metal to stone, ceramic to Stone and …
  3. Suitable temperature resistance
  4. Low cooking shrinkage
  5. Appropriate setting time depending on the type of application
  1. Very high corrosion resistance
  2. Can be used in wet or oily environments
  3. Proper compressive strength
  4. Ability to adjust viscosities by type of application
  5. Relatively long shelf life
  6. Ability to bake at different temperatures
  7. Suitable long-term strength
  8. Suitable for impact resistance and fatigue in certain types
It is a two-component filler and anti-flake adhesive with easy cooking and use. This adhesive can be used to install facade stone in the construction industry. Epolock 1100
is a similar two-part adhesive Epolock 1100 that has a setting time of 5 minutes at a temperature of 25 degrees Celsius. It can be machined for 30 minutes and reaches its final strength. This adhesive can be used to install facade stone in the construction industry. Epolock 1100F
is a two-component adhesive, an environmental curing with strength and toughness suitable for general use. This adhesive can be used to glue all kinds of parts in different industries (oil and gas, petrochemical, water and sewage, aerospace, cars, etc.). Epolock 2100
is a two-component adhesive, temperature curing with high strength and chemical resistance and temperature. This adhesive can be used in corrosive chemical environments at high temperatures. This adhesive can be used to glue all kinds of parts in different industries (oil and gas, petrochemical, water and sewage) Epolock 2200
Designed for use in completely wet environments. This adhesive is made in such a way that it can be baked at low temperatures (up to 5 degrees Celsius) and reach its final strength. This adhesive can be used to bond a variety of parts, including metals, fiberglass composites and ceramics, even in completely humid conditions. Epolock 3100
An epoxy-based two-component primer is a high-viscosity curing environment. This primer can be used as a corrosion-resistant coating on metal and concrete parts and structures. It can also be used to bond fiberglass composite to metal and concrete surfaces. Appeared Epolock 5100